Wear-Resistant Customize Pressureless Sintered Sic Silicon Carbide Sheet 50X50mm Ceramic Plate

• Customization: Available
• Corrosion Resistance: Acid Resistant
• Density: >3.0 g/cm3
• Model NO.: SIC Ceramics
• Application: Structure Ceramic, Industrial Ceramic
• Hardness: Hv0.5 ≥ 2600
• Type: Ceramic Part
• Product Name: Hard Ceramic Plate Ceramic Sheet
• Shape: Single-Curved/Mult-Curved
• Sample: Accept
• MOQ: 50 PCS
• Feature: Low Price and High Strength
• Silicon Carbide Raw Material Purity: ≥ 99 %
• Flexural Strength MPa: ≥ 400
• Elastic Modulus Gpa: 400
• Thermal Conductivity W/(M•K): 30 ~ 110
• Temperature Resistance ºC: 1600
• Compressive Strength MPa: ≥ 2200
• Thermal Expansion Coefficient 1e-6 /K: 4.0
• Apparent Porosity %: < 0.2
• Transport Package: Carton Box
• Specification: customized
• Trademark: ODM, OEM
• Origin: China
• HS Code: 6909190000
• Production Capacity: 50000 Kg/Year

Product Description

Product Description

Structure and Performance

Silicon carbide (SiC) mainly has two crystal structures, namely cubic β-SiC and hexagonal α-SiC. It is a compound with strong covalent bonds, and the ionic type of its Si--C bond is only about 12%. Therefore, compared with other ceramics such as alumina and boron carbide, it has better mechanical properties, oxidation resistance, higher wear resistance and lower friction coefficient. In addition, its excellent properties such as good thermal stability, high high temperature strength, small thermal expansion coefficient, high thermal conductivity, good thermal shock resistance and chemical corrosion resistance have been favored by military experts from various countries and are widely used.

Bulletproof principle
The basic principle of armor protection is to consume the energy of the bullet, slow down the bullet and make it harmless. Most traditional engineering materials, such as metal materials, absorb energy through plastic deformation of the structure, while ceramic materials absorb energy through micro-crushing process.
The energy absorption process of silicon carbide bulletproof ceramics can be roughly divided into three stages:
(1) Initial impact stage: The bullet hits the ceramic surface, making the bullet blunt, and absorbs energy in the process of crushing the ceramic surface into small and hard fragments;
(2) Erosion stage: The blunted bullet continues to erode the fragment area, forming a continuous layer of ceramic fragments;
(3) Deformation, crack and fracture stage: Finally, tensile stress is generated in the ceramic to cause the ceramic to break, and then the back plate is deformed, and the remaining energy is all absorbed by the deformation of the back plate material. In the process of the bullet hitting the ceramic, both the bullet and the ceramic are damaged.

Parameters

ITEM	UNIT	SiC
Silicon carbide raw material purity	%	≥ 99
Density	g/cm³	3.10 ~ 3.15
Hardness	HV0.5	≥ 2600
Flexural strength	Mpa	≥ 400
Elastic modulus	Gpa	400
Thermal conductivity	W/(m•K)	30 ~ 110
Temperature resistance	ºC	1600
Compressive strength	Mpa	≥ 2200
Thermal expansion coefficient	1E-6 /K	4.0
Apparent porosity	%	< 0.2

 

Typical Characteristics

 

1. High effeciency of heat-conduction
2. Heat shock stablity
3. Wear resistant
4. High temper-endure(up to 1200deg-1600deg)
5. Self-lubrication
6. High performance of mechanical strength
7. Chemical corrosion-resistant

 

Detailed Photos

Ballistic Material for the Plates:

i)  Alumina(AL2O3) Ceramic Tiles & UHMWPE Backing (III-IV)

ii) Silicon Carbide( SIC) Ceramic Tiles & UHMWPE Backing (III-IV)

iii) 100% Pure UHMWPE( III / III+/ III++)

Bulletproof Plate Cutting:

i)  SAPI cut is the shape of SAPI boards that fill the streets. (e.g. SAPI/ESAPI)

ii) Special tailoring refers to more aggressive corner cuts than SAPI, facilitating arm movements and shoulder support.
There are so-called SHOOTERS cut and SWIMMER cut.

iii) Traditional cutting includes the simplest square board, the smallest reinforcement, and small corners similar to RBA. (such as FULL SIZE)


Construction:

i)  in conjuction with (ICW.) IIIA or lower threat level soft armor panel;        
  
ii) Stand Alone(SA.),which means it can protect against the III/IV rating  threat without any soft armor ballistic panels / inserts.

PROTECTION LEVEL LEVEL IIIA	PROTECTION LEVEL LEVEL III	PROTECTION LEVEL LEVEL III+	PROTECTION LEVEL LEVEL IV
STOPS .357 SIG, .44 MAGNUM	STOPS 7.62 M80; .308 CAL	STOPS 5.56 M855 GREEN TIP, 7.62X54R	STOPS 5.56 M855, .30-06 APM2
MATERIAL 100% PE PLATE	MATERIAL UHMW POLYETHYLENE	MATERIAL PE+ CERAMIC-COMPOSITE	MATERIAL PE+ CERAMIC-COMPOSITE
WEIGHT AS LIGHT AS 1.1 LBS.	WEIGH AS LIGHT AS 3.3 LBS.	WEIGHT AS LIGHT AS 4.4 LBS.	WEIGHT AS LIGHT AS 6.0 LBS.
THICKNESS 0.90″	THICKNESS 0.90″	THICKNESS 0.85″	THICKNESS 0.90″

   
 

Rated Products

 

Packaging & Shipping

 

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

Inner packing:Shockproof foam board.	Outer packing:Carton or Case.

 

Company Profile

At WEIDUN TECHNOLOGY, we are passionate about protecting and saving lives. We've partnered with the best brands under a strict set of guidelines and offer the high quality body armor and safety equipment available on the market.

Whether you are a professional already familiar with body armor, or a normal civilian just looking to protect yourself, our gear and equipment will provide you with the protection and security you can trust.

FAQ

1. who are we?

We are based in Jiangsu, China, starting from 2022, sell to Eastern Europe, North America, Africa, Mid East, Domestic Market, South America, and Northern Europe. There is a total of about 51-100 people in our office.

2. how can we guarantee the quality?

Always a pre-production sample before mass production;
Always final Inspection before shipment;

3. what can you buy from us?

Bulletproof vests, Bulletproof helmets, bulletproof plates, stabproof productions, Tactical Vest

4. why should you buy from us, not from other suppliers?

1\We are a manufacturer of safety supplies
2\We have a complete production line and quality control, can provide you with guaranteed service
3\In the safety supplies industry we have 15 years of supply experience, and have own factory

5. what services can we provide?

Accepted Delivery Terms: FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES;
Accepted Payment Currency: USD, EUR, JPY, CAD, AUD, HKD, GBP, CNY, CHF;
Accepted Payment Type: T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Western Union, Cash, Escrow;
Language Spoken: English, Chinese, Spanish, Russian